ORVESTRA · WIKI

DSP - Loudness presets

Loudness On / Off

Enables bass/treble compensation for quiet listening. App and Line In follow Main volume; output Loudness follows Master and zone volume.

On / Off; the switch also immediately sends the current draft. Source correction bypasses output Loudness for the same mix.

Listening reference level. Correction is zero at or above this level, and grows below it toward the specified boosts.

-100 to +20 dB. Full correction is reached 20 dB below reference.

Maximum low-frequency boost during quiet listening.

0-20 dB; actual correction depends on listening level relative to reference.

Maximum high-frequency boost during quiet listening.

0-20 dB; correction decreases as listening level approaches reference.

Attenuates the midrange alongside Loudness correction to balance the response.

On / Off; confirm the draft with Apply.

Loads the processor settings stored in this module slot, rather than a whole scene.

Names are configurable. An unsaved AGC/Loudness slot cannot be loaded.

Stores the current module state in this slot, replacing its previous contents.

Module snapshot; the card shows the last saved time.