Orvestra

ORVESTRA · WIKI

Tone Generator - Sweep

Tone Generator - Sweep
Actual interface capture from the user guide.

fixed

Selects a continuous sine wave at one frequency. Selecting the mode does not start sound.

Fixed mode; playback starts with Start.

beat

Selects a periodic sine-wave kick pulse.

Beat mode; frequency, BPM and pulse duration are set separately.

sweep

Selects repeated sweeps from a start to an end frequency.

Sweep mode; endpoints and period are set separately.

Zone / output bus

Selects the zone receiving the test signal through the active DSP path.

Enabled zones; this does not bypass DSP.

Start frequency

Sweep start frequency.

10-22000 Hz.

End frequency

Sweep end frequency.

10-22000 Hz.

Sweep period

Time for one pass from start to end frequency.

0.5-20 s, step 0.5 s.

Level dBFS

Digital level of the generated test signal.

-60 to 0 dBFS, step 1 dB; default -30 dBFS.

Start generator

Starts the test signal with the selected settings in the selected zone.

Repeats until stopped; disabled while the generator is active.

Stop generator

Stops the tone generator.

Disabled when the generator is inactive.

All guide topics